|
zeik |
06/03/30 16:19 |
|
同じ様な質問をいくつかお見受けしますが、自分の物と見比べてもPCへの知識が足りない為、動作するものか判断しかねましたのでこちらで質問させて頂きます。
------------------
System Information
------------------
Time of this report: 3/30/2006, 15:54:00
Machine name: YOUR-26CD0D1718
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: Japanese (Regional Setting: Japanese)
System Manufacturer: Gateway
System Model: Gateway M320 and 4500 Series
BIOS: BIOS Version 53.01.02
Processor: Intel(R) Pentium(R) M processor 1.60GHz
Memory: 990MB RAM
Page File: 318MB used, 1302MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: Intel(R) 82852/82855 GM/GME Graphics Controller
Manufacturer: Intel Corporation
Chip type: Intel(R) 82852/82855 GM/GME Controller
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_3582&SUBSYS_203A161F&REV_02
Display Memory: 64.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768)
Monitor Max Res:
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.4497 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/7/2006 08:56:16, 45697 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: Mini VDD: ialmnt5.sys
Mini VDD Date: 2/7/2006 09:04:34, 1399615 bytes
Device Identifier: {D7B78E66-76C2-11CF-3E64-3000A3C2CB35}
Vendor ID: 0x8086
Device ID: 0x3582
SubSys ID: 0x203A161F
Revision ID: 0x0002
Revision ID: 0x0002
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
上記のような状態で、必要スペック引き上げ後に起動、または動作可能なのでしょうか?