マビノギ

緋野青空

06/12/06 15:51

とりあえずは動くときは問題なく動くのですが、何の前触れもなくフリーズしてしまします。
固まるっていっても、なんというかｶﾞｯｶﾞｯｶﾞとなってしまってまともにマビができません。
 
以前からそういうのはあったのですが再起動してもう一度やったら問題なく動いていたのですが、最近は頻繁にフリーズするようになって、マビができません；；
 
スペックのほうに問題あるかもしれませんが、色々ご指摘や問題点などをお願いします。
 
 
------------------
System Information
------------------
Time of this report: 12/6/2006, 15:41:25
       Machine name: LYRILIGHT
   Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
           Language: Japanese (Regional Setting: Japanese)
System Manufacturer: FUJITSU
       System Model: FMVLX50S
               BIOS: Award Medallion BIOS v6.00PG
          Processor: Intel(R) Celeron(R) M processor         1.60GHz
             Memory: 448MB RAM
          Page File: 405MB used, 649MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.2600.2180 32bit Unicode
 
---------------
Display Devices
---------------
        Card name: ATI RADEON XPRESS 200M Series
     Manufacturer: ATI Technologies Inc.
        Chip type: ATI RADEON XPRESS 200M Series (0x5A62)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_5A62&SUBSYS_13A610CF&REV_00
   Display Memory: 64.0 MB
     Current Mode: 1280 x 1024 (32 bit) (60Hz)
          Monitor: (  Monitor Max Res:
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6575 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 9/27/2005 21:47:18, 241664 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD:          Mini VDD: ati2mtag.sys
    Mini VDD Date: 9/27/2005 21:46:58, 1345536 bytes
Device Identifier: {D7B71EE2-1922-11CF-D06A-AC33A1C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x5A62
        SubSys ID: 0x13A610CF
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel: ModeMPEG2_C ModeMPEG2_D
 Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run
 

 
皆様詳しいご回答ありがとうございました^^
取り合えず今の所大きなお金もないのでメモリの増設をしてみたいと思います～。
512Mか1Gあたりがいいのですかね～？
ともかくありがとうございました！